Manual fire fighting services

Fire fighter suits are firefighters wearing fire fighting protective clothing. For fire operations has prevented nearly wearing the human body against heat, fire fighting operation is the most basic and appropriate personal protective equipment. The clothing is not in the following hazardous environments to provide protection to the wearer.

Through the fire zone or similar hazardous environments
Chemical spills Environment
Contact with large quantities of flammable liquids live in the environment
First, the structure
1, the inner and outer garments using detachable structure, four material combinations. From the surface layer, waterproof breathable layer, insulation layer and comfort layer, and the upper and lower clothing obvious place reflective signs.
2, set of clothing including tops, overalls. The clothing worn body protection just to enter the job site should also wear other personal protective equipment to protect the wearer other parts of the body, such as the feet, hands and head.
Second, the technical characteristics
1, the main performance: a perpetual flame burning compartment, waterproof, breathable, flexible, suitability and other functions in the nearby fire operations can effectively prevent heat conduction.

2, the main technical parameters

 Flame retardant: Damaged length ≤ 10cm; continued burning time ≤ 2s; without droplet phenomenon.
Breaking strength: warp and weft ≥ 650N.
Tear strength: warp and weft ≥ 100N.
Thermal stability: 260 ℃, 5min, shrinkage ≤ 10%, no surface change.
Hydrostatic pressure: ≥ 17Kpa.

Third, the method of dress clothing

Only in jacket and trousers were worn and proper closure to ensure the performance of clothing, dress according to the following methods must be properly dressed.

1, will be set into the fire boots trousers, put together with the pants, pull the zipper, buttoned waistband buckle, adjust the straps.

2, put on the jackets, fasten all enclosed area.

3, if necessary, ruffled collar and buckle clasp around the palate shelter together.

Four, clothing washing method

1, because the Fire fighter clothing is detachable and outside, we recommend that you only have to wash the outer layer, the outer washing, can be washed can be dry cleaning, washing when the water temperature is not greater than 40 ℃, use a neutral detergent.

2, such as the inner layer to be washed, preferably dry, use should be washed with soap wash, and finally use the shower and dry drying, breathable layer to prevent clogged pores, affecting the ventilation effect. NEVER use thump washing method. Inappropriate clothing washing method back to change the appearance and level.

Five, maintenance and repair

1, after wearing the protective clothing should be hung in a ventilated and dry place, not placed in a humid environment.

2, such as clothing hook small area appears timely to mend broken, damaged large areas can play a protective role is not allowed to enter the fire scene.

Six, storage conditions

1, Do not mix with oil during storage or corrosive materials in contact.

2, beware of hooking and prevent mildew.

3, stored in a dry and ventilated room and avoid rain, moisture, exposure.