Fire helmet use cleaning and maintenance and the note

When on fire helmet hat shell is clean, use soap and water and soft cloth to clean. Don't recommend the use of grinding sand mold cleaning sponge surface screen and safety goggles, recommend the use of fire helmet supplier sea on offer professional detergent and soft cloth to clean, ensure the cleaning of the surface screen without damage. When clean cap lining, the cap can be lined with about 30 degrees Celsius temperature with mild detergent to clean warm water. As far as possible using tap water rinse cap inside the shell. Note: do not use hydrocarbon cleaning products or solvent cleaning and fire helmet surface screen and goggles.

After cleaning the fire helmets you need for each part, especially all the link of a thorough examination. Mainly check the correct part fixed way fixed parts, secondly whether there is a visible wear parts, helmet whether any damage. Ensure the normal regulation of the fire helmet. If there are parts damaged parts, it is only through the helmets are accredited suppliers to buy parts for installation, in order to ensure that the helmet in conformity with the specifications. Recommendations on a regular basis to qualified institutions to test whether a helmet to use standard.

If fire helmet clean up is completed, you can put on the helmet specific protection bag, or seal, such as closet, cabinets, etc. Storage place as far as possible away from humidity, illumination and exhaust gas. Avoid falling when stored in or knock against, because it may lead to damage of mask, helmet weaken shock absorption system function or damage to the surface protection coating.

Fire helmet use notice:

The helmet is not suitable for long time use.

Safety goggles when have scratches or damage should be replaced.

When carrying a helmet, mask and safety goggles should be stored in the helmet.

If sensitive physique, when material in contact with the skin, can cause allergic reactions.

After each use of the fire helmet, to make a thorough clean.